MBR-80X95.5X5.9
MBR Buffer Seal, 80 X 95.5 X 5.9
Part #:
MBR-80X95.5X5.9
Min. Order Qty: 1
Brand: HPSI
HPSI
Molded in PTFE with a rubber energizer, MBR buffer seals absorb the shock of pressure spikes protecting the rod seal. Note: For higher temperatures, the nitrile O-ring in this seal can be replaced by a fluorocarbon O-ring at an additional charge.
| Inside Diameter | : | 80 mm |
| Material | : | Filled PTFE/Nitrile |
| Outside Diameter | : | 95.5 mm |
| Part Number | : | (Prefix)-(ID)X(OD)X(H) |
| Pressure Range | : | 0 TO 5,000 PSI |
| Temperature Range | : | -40° to 220°F |
| Width | : | 5.9 mm |
- MBR style
- 2 piece
- Step cut
- Bronze cap
- Nitrile energizer